How to modify the polyline

How to modify the polyline

To modify the polyline

Step 1

If you would like to modify the Polyline, first, you must use the mouse to open the Modify menu and then open the Object sub menu. Later, you need to click the Polyline command.

Step 2

Next, in the command window, a message will be displayed. You just need to enter an option Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltypegen/Undo.

Edited By: Norasyikin Mahmud

© 2001 Inner Esteem

All rights reserved. All other product names and trademarks are registered properties of their respective owners.

290801

How to draw the double line

How to draw the double line

To draw the double line

Step 1

To draw the double line, the first thing you must do is to use the mouse to open the Draw menu. Later, click the Double Line command.

Step 2

Next, place the insertion point to where you want to insert it.

Step 3

Now, use the mouse to specify the start and the end point. If you want to continue the drawing, just go to step 1 and if you want to end the drawing, go to the next step. Finally, press the Esc key.

How to work with Fillet

How to work with Fillet

To work with Fillet

Step 1

To work with Fillet, first, you need to use the mouse to open the Modify menu and then click the Fillet command.

Step 2

Now, you have to select the first object. After that, select the second object and then press the Enter key. You could see that the lines are parallel.

How to work with Chamfer

How to work with Chamfer

To work with Chamfer

Step 1

To work with Chamfer, the first thing you must do is to use the mouse to open the Modify menu and then click the Chamfer command.

Step 2

Now, select the object and then press the Enter key.

How to work with Break

How to work with Break

To work with Break

Step 1

If you wish to work with Break, first, you need to use the mouse to open the Modify menu and then click the Break command.

Step 2

After that, select the object and then press the Enter key.

Step 3

Finally, specify the second break point.

How to work with Stretch

How to work with Stretch

To work with Stretch

Step 1

To work with Stretch, first, you need to use the mouse to open the Modify menu and then click the Trim command.

Step 2

After that, you need to select the object and then press the Enter key.

Step 3

Finally, you ought to select object to trim or shift-select to extend. You must remember that the curve must intersect cutting edges at least twice.

How to work with Scale

How to work with Scale

To work with Scale

Step 1

To work with Scale, first, use the mouse to open the Modify menu and then click the Scale command.

Step 2

Next, you need to select the object and then press the Enter key.

Step 3

Finally, you have to specify the base point and specify the scale factor or Reference.

How to rotate the object

How to rotate the object

To rotate the object

Step 1

To rotate the object, the first thing you must do is to use the mouse to open the Modify menu and then click the Rotate command.

Step 2

Select the object that you want to rotate and then press the Enter key.

Step 3

Now, you need to specify the base point and finally, specify the rotation angle or Reference and then press the Enter key.

How to move the object

How to move the object

To move the object

Step 1

To move the object, first, you need to use the mouse to open the Modify menu and then click the Move command.

Step 2

After that, select the object that you want to move and then press the Enter key.

Step 3

Later, you ought to specify the base point or displacement. Finally, you need to specify the second point of displacement or use the first point as displacement.

How to work with Mirror command

How to work with Mirror command

To work with Mirror command

Step 1

To work with Mirror command, first, you could use the mouse to open the Modify menu and then click the Erase command.

Step 2

Next, you need to select the object and then press the Enter key.

Step 3

Now, you need to specify the first point of mirror line and then specify the second point of mirror line. Later, it will ask you whether you want to delete source objects.

How to work with Copy command

How to work with Copy command

To work with Copy command

Step 1

To work with Copy command, first, use the mouse to select the object that you want to copy it.

Step 2

Next, you need to use the mouse to open the Edit menu and then click the Copy command.

Step 3

After that, you ought to use the mouse to open the Edit menu. Later, click the Paste command.

Step 4

Finally, move the mouse to the page to where you want to paste the object.

How to work with Erase command

How to work with Erase command

To work with Erase command

Step 1

To work with Erase command, first, you need to use the mouse to select the object that you want to delete.

Step 2

After that, you need to use the mouse to open the Modify menu and then click the Erase command.

Step 3

Finally, you will see the selected object is being deleted.

How to change the line color

How to change the line color

To change the line color

Step 1

To change the line color, first, you must use the mouse to open the Format menu and then click the Color command.

Step 2

Later, select the color that you want and then click Ok button.

Step 3

You can also try to draw the object and you will see that the line color has changed.

How to draw the center mark

How to draw the center mark

To draw the center mark

Step 1

To draw the center mark, the first thing you need to do is to use the mouse to open the Dimension menu and then click the Center Mark command.

Step 2

After that, you ought to select the arc or circle.

How to draw the Continue

How to draw the Continue

To draw the Continue

Step 1

If you wish to draw the Continue, you ought to use the mouse to open the Dimension menu first. After that, click the Continue command.

Step 2

Next, you must specify the second extension line origin.

How to draw the Baseline

How to draw the Baseline

To draw the Baseline

Step 1

To draw the Baseline, first, you must use the mouse to open the Dimension menu and then click the Baseline command.

Step 2

Next, you need to specify the second extension line origin.

How to draw the Angular

How to draw the Angular

To draw the Angular

Step 1

If you wish to draw the Angular, the first thing you must do is to use the mouse to open the Dimension menu and then click the Angular command.

Step 2

Next, you ought to select the arc or circle.

Step 3

Later, select the arc, circle, line and specify the second angle endpoint. Finally, you need to specify the dimension arc line location.

How to draw the Diameter

How to draw the Diameter

To draw the Diameter

Step 1

To draw the Diameter, the first thing you must do is to use the mouse to open the Dimension menu and then click the Diameter command.

Step 2

Next, you need to select the arc or circle.

Step 3

Now, you just need to specify the dimension line location and finally, use the mouse to drag and draw the line.