Tuesday, September 25, 2007

How to modify the polyline

How to modify the polyline

To modify the polyline

Step 1

If you would like to modify the Polyline, first, you must use the mouse to open the Modify menu and then open the Object sub menu. Later, you need to click the Polyline command.

Step 2

Next, in the command window, a message will be displayed. You just need to enter an option Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltypegen/Undo.

Edited By: Norasyikin Mahmud

© 2001 Inner Esteem

All rights reserved. All other product names and trademarks are registered properties of their respective owners.

290801

How to draw the double line

How to draw the double line

To draw the double line

Step 1

To draw the double line, the first thing you must do is to use the mouse to open the Draw menu. Later, click the Double Line command.

Step 2

Next, place the insertion point to where you want to insert it.

Step 3

Now, use the mouse to specify the start and the end point. If you want to continue the drawing, just go to step 1 and if you want to end the drawing, go to the next step. Finally, press the Esc key.

How to work with Fillet

How to work with Fillet

To work with Fillet

Step 1

To work with Fillet, first, you need to use the mouse to open the Modify menu and then click the Fillet command.

Step 2

Now, you have to select the first object. After that, select the second object and then press the Enter key. You could see that the lines are parallel.

How to work with Chamfer

How to work with Chamfer

To work with Chamfer

Step 1

To work with Chamfer, the first thing you must do is to use the mouse to open the Modify menu and then click the Chamfer command.

Step 2

Now, select the object and then press the Enter key.

How to work with Break

How to work with Break

To work with Break

Step 1

If you wish to work with Break, first, you need to use the mouse to open the Modify menu and then click the Break command.

Step 2

After that, select the object and then press the Enter key.

Step 3

Finally, specify the second break point.

How to work with Stretch

How to work with Stretch

To work with Stretch

Step 1

To work with Stretch, first, you need to use the mouse to open the Modify menu and then click the Trim command.

Step 2

After that, you need to select the object and then press the Enter key.

Step 3

Finally, you ought to select object to trim or shift-select to extend. You must remember that the curve must intersect cutting edges at least twice.

How to work with Scale

How to work with Scale

To work with Scale

Step 1

To work with Scale, first, use the mouse to open the Modify menu and then click the Scale command.

Step 2

Next, you need to select the object and then press the Enter key.

Step 3

Finally, you have to specify the base point and specify the scale factor or Reference.